PERFORMANCE FAR ABOVE ITS SIZE

The Turbo Ventura was designed in Australia by Edmonds. It has a 150mm throat which, while smaller than conventional domestic turbine ventilators, is compensated by its vertical vane design. This enables efficient operation at very low wind speeds – when most ventilators are not spinning.

Turbo Ventura has the following special features:

1. Attractive Appearance. The size of the Turbo Ventura means that it blends subtely with most roof types.
2. Unique Design. The vertical vane design and ASA polymer construction ensure efficient air movement. Two permanently lubricated bearings ensure a smooth and effective air flow.
3. Won’t rust, corrode or crack. The special polymer composition cannot rust or corrode. The internal bracing is reinforced to prevent stress cracking.
4. Withstands severe wind and rain. In Independent laboratory trials, Turbo Ventura withstood wind velocities of 240km/hr and satisfied the Dynamic Rain Penetration Test.
5. Fits any roof. Edmonds "Vari-Pitch" base design and flashing enables the Turbo Ventura to be fitted securely to most roof types with a pitch less the 45°.
6. Easily installed. Concise and easy to follow installation instructions are included to enable any home handyperson to install Turbo Ventura. Alternatively, your retailer or Edmonds can arrange installation anywhere in Australia.

 

Specifications

MATERIAL

• Top:          ASA Plastic
• Shaft:        Aluminium
• Varipitch:    Aluminium
• Flashing:    430x430x0.7mm soft aluminium

ROTATION BEARINGS    

WEIGHT    

• Top:          0.7kg
• Varipitch:   0.1kg
• Flashing:   0.4kg
• Total:        1.2kg

WIND SPEED RATING        

• 205.2km/h (57m/s) – Performance level 1
• (As per AS 4740:2000 Natural ventilators-Classification and performance)

TOLERANCES    

• Size  +/- 3mm
• Weight  +/- 0.1kg

The Turbo Ventura Warranty

Edmonds Products (Aust.) warrants this product for five years against mechanical failure. For full details see warranty enclosed with the product.